基于混合优化的前馈—反馈复合控制器最优设计

为了解决传统PID控制器在电动舵机系统设计中难以满足控制要求的问题,首先设计了一种规范化前馈-反馈控制系统,然后利用混沌优化算法和共轭梯度方法相结合的混合优化算法对前馈-反馈控制器参数进行了优化.仿真结果表明:基于混合优化算法的前馈-反馈控制器具有很好的动态和静态性能,增强了系统的稳定性和鲁棒性,降低了学习参数选择的盲目性和对经验的高度依赖性.     

复合成本计算中合理设定复合元数问题研究

从合理性和科学性角度对复合成本计算过程中复合元数的设定进行了评价。运用模糊数学方法建立了评价矩阵,通过模糊合成使评价结果更加切合实际,解决了企业成本管理中复合元数判断的模糊性和不确定性问题,避免了复合成本计算过程中因复合元数设定不经济或简单化而出现的功能过剩或功能不足的现象出现。     

针对不同视场辅助信标的无人机目标定位方法

针对无人机在单站测角测距的目标定位过程中受无人机姿态角误差影响较大的问题，提出一种对辅助信标进行探测并与惯性传感器相结合的无人机姿态求解方法。建立基于容积卡尔曼滤波的惯性传感器姿态求解模型，采用梯度下降法对基于辅助信标的无人机位姿参数进行求解，并综合它们的结果对无人机的姿态偏差进行估计和校正，最后完成了不同视场条件下的目标定位和仿真计算。结果表明，所提方法对无人机目标定位精度有明显提高。     

On gamma estimation via matrix kriging

In financial engineering, sensitivities of derivative prices (also known as the Greeks) are important quantities in risk management, and stochastic gradient estimation methods are used to estimate them given the market parameters. In practice, the surface (function) of the Greeks with respect to the underlying parameters is much more desired, because it can be used in real‐time risk management. In this paper, we consider derivatives with multiple underlying assets, and propose three stochastic kriging‐based methods, the element‐by‐element, the importance mapping, and the Cholesky decomposition, to fit the surface of the gamma matrix that can fulfill the time constraint and the precision requirement in real‐time risk management. Numerical experiments are provided to illustrate the effectiveness of the proposed methods.     

机动管线河流水面铺设牵引力分析与计算

机动管线在穿越河流时常采用水面浮运的方式铺设到对岸,铺设过程中,准确计算管线所受拉力是可靠地设计穿越装备、管线安全施工及运行的关键。建立了水面浮运的数学模型,得出了受力面积的选取方法,利用积分法导出了管线两端拉力的计算公式,指出了影响拉力的因素。采用3种流速方式分别计算出管线两端的拉力并进行了比较,采用符合实际情况的水面流速函数计算出的结果比较合适,对铺设设备的选取提供了理论支撑,对管线铺设有一定的参考价值。     

Na_2SO_4·10H_2O相变过程及其相变潜热的计算

利用CDR-34P差动热分析仪测试Na2SO4·10H2O相变前后的热效应,结合Na2SO4-H2O体系的二元相图,分析相变前后热效应的来源及体系相态、组分的变化;提出无机水合盐相变潜热除来源结晶水脱离外还包括固相物质溶解、溶液浓度梯度变化的热效应的观点;根据上述相变过程计算Na2SO4·10H2O相变潜热,误差仅为2%.     

Numerical simulation of the blast wave of a multilayer composite charge

The numerical simulation of a blast wave of a multilayer composite charge is investigated. A calculation model of the near-field explosion and far-field propagation of the shock wave of a composite charge is established using the AUTODYN finite element program. Results of the near-field and far-field calculations of the shock wave respectively converge at cell sizes of 0.25–0.5 cm and 1–3 cm. The Euler––flux-corrected transport solver is found to be suitable for the far-field calculation after mapping. A numerical simulation is conducted to study the formation, propagation, and interaction of the shock wave of the composite charge for different initiation modes. It is found that the initiation mode obviously affects the shock-wave waveform and pressure distribution of the composite charge. Additionally, it is found that the area of the overpressure distribution is greatest for internal and external simultaneous initiation, and the peak pressure of the shock wave exponentially decays, fitting the calculation formula of the peak overpressure attenuation under different initiation modes, which is obtained and verified by experiment. The difference between numerical and experimental results is less than 10%, and the peak overpressure of both internal and external initiation is 56.12% higher than that of central single-point initiation.     

某巡航导弹靶标RCS的仿真分析

某型巡航导弹靶标主要用于对拦截该弹的反导防御系统进行性能评估,而其在雷达照射下的RCS值是进行评估的一项重要指标,为研究其RCS值对反导防御系统中的雷达探测能力的影响,采用基于高频局部性原理的物理光学法(PO)和等效电磁流法(EEMC) 的综合来计算测量导弹的RCS值,并在改变雷达照射波入射方位角的情况下对该型导弹RCS的相应改变情况进行仿真分析,得出了该型号导弹的RCS图,为评估反导防御系统地基雷达的性能提供了参考依据.     

Lipschitz非线性系统状态观测器设计新方法

针对Lipschitz非线性系统状态观测器,提出了一种以极小化条件数为目标准则的新的设计方法。运用梯度下降法和Slyvester方程,计算极小化条件数,优化增益矩阵和最大允许Lipschitz常数,完成观测器设计。通过同其它文献的算例比较,结果发现按文中方法设计的观测器具有迭代次数少、优化结果好的特点。     

船载炮对岸射击的特点及射击诸元计算

根据陆炮的结构性能和使用特点,对陆炮在射击平台由陆地改变为舰船时,对岸射击的特点、非标准弹道气象条件对射击的影响及修正、目标高低角及高角差的影响和修正、摇摆的影响及措施等进行了研究与分析。解决了船载炮射击时射击诸元计算与射击条件相适应的问题,并具体分析了船载炮对岸射击时射击诸元计算的原理公式、计算方法和实施方法。